VESS Propellers...

                An exceptionally efficient prop having more consistent pull over the length of the blade, it does not pull exhaust oil onto itself as do others.

• 22in.

   

  • "B" pitch - The 22in "Baseline" pitch prop is ideal for many DL50 applications. This prop for example, flies our 14lb H9 260 all the way up to our 19.8lb "Porky" Yak in 3D mode very well. Even Porky will pull itself out of a hover nicely with this prop and go out of sight vertical if you let it. Engine spool up is brisk and the engine is loaded toward the top end of the power band at sea level to 1000ft. Price - $28

   

  • "A" pitch - The 22in lighter engine load prop is great for heavier weight airframes or higher altitude applications. A bit like choosing a lower gear in your cars transmission, this prop allows a heavier aircraft to be moved more quickly but results in a lower top speed. This prop can be used for some real fun with lighter planes too. The lighter load will allow the engine to spool up even more quickly and get it higher into the power band for some spectacular "pogos" and other tricks. Be careful though to not over rev your engine with this prop in this application (set your throttle end point to 7200rpm).  Price - $28

     

  • "C" pitch - The 22in higher engine load prop is great for scale airframes or applications where a bit more speed is desired. A bit like choosing a higher gear in your cars transmission, this prop allows a higher top speed but at a lesser rate of acceleration. These props will get your war bird flying fast and furious but with a more scale take off.  Price - $28

   

• 23in.

 

• "B" pitch - The 23in "Baseline" pitch prop works well in tuned pipe applications where engine output has been increased. It's also an excellent choice for lighter airframes used in precision aerobatics.  Price - $32

 

• "A" pitch - The 23in lighter engine load prop is preferred by many for use in precision aerobatics where better down line breaking and smoother throttle transitions are desired. This prop loads the engine such that pulling power is quite high. This prop also works extremely well for 3D flying with lighter planes that have smaller control surfaces than optimum for 3D. The extra prop wash created by this prop enhances smaller control surface response.  Price - $32

JTec Wrap Around Pitts mufflers...

               Beautifully finished and only 7oz heavier than the stock DL50 exhaust, it gives you a quieter and more mellow tone and a more tucked away look. Unlike other after market exhausts, these do not adversely affect top end performance.

PRICE:    $90    and can be shipped with the engine for no additional shipping cost.

Prop Drill Jigs...

                Makes drilling your props much easier and more precise. We've used one of them to drill over 100 props and it shows no sign of wear.

PRICE:    $24    and can be shipped with the engine for no additional shipping cost.